Acer ARMC_3P User Manual - page 41
C
HAPTER
4:
U
SAGE
29
The ARMC/3P has a built-in admin that has all the permissions to administer your
ARMC/3P. See the following table for the default settings.
Table 7 Standard User Settings
Parameter
Value
Login
admin
Password
password
When you login for the first time on the ARMC/3P a window will open to request a
password change as shown in Figure 23. The password change is to prevent
unauthorized access of the host system and the ARMC/3P.
Figure 23 Password Change Request
Important: Please make sure to change the admin user password
immediately after you have installed and accessed your ARMC/3P
for the first time. Not changing the pass phrase for the admin user
is a severe security risk and might result in unauthorized access to
the ARMC/3P and to the host system including all possible
consequences!
Navigation
Having logged into the ARMC/3P successfully, the main page of the ARMC/3P
appears (see Figure 24). This page consists of three parts, each of which contains
specific information. The buttons on the upper side allow you to switch between the
different sections of the ARMC/3P (see Figure 25). The lower left frame contains
user and device information (see
錯誤
錯誤
錯誤
錯誤! 找不到參照來源
找不到參照來源
找不到參照來源
找不到參照來源。
。
。
。 for details). Within the
right frame, task-specific information is displayed that depends on the section you
have chosen before.