Acer ARMC_3P User Manual - page 86
74
P
RODUCT
U
SER
G
UIDE
Then, click Apply to submit your changes.
Keyboard/Mouse
Figure 76 Keyboard and Mouse Settings
Host Interface
Enables a certain interface the mouse is connected to. You can choose between
Auto for automatic detection, USB for a USB mouse and PS/2 for a PS/2 mouse.
Important: To use the USB and/or PS/2 interface you need a correct
cabling between the managed host and the managing device. If the
managed host has no USB keyboard support in the BIOS and you
have connected the USB cable only then you will have no remote
keyboard access during the boot process of the host. If USB and
PS/2 are both connected and you selected “Auto” as host interface,
then the card will select “USB” if available or otherwise falls back
to “PS/2”.
To get USB remote keyboard access during the boot process of the host, the
following conditions must be fulfilled:
•
the host BIOS must have USB keyboard support
•
the USB cable must be connected or must be selected in the Host interface
option