Acer ARMC_3P User Manual - page 58
46
P
RODUCT
U
SER
G
UIDE
2. Choose the option Video Settings from the Options Menu of the Remote
Console. Press the button Reset this Mode.
Figure 43 Remote Console Video Settings: Reset this Mode
3. Again, press the Auto Adjust button once.
4. The ARMC/3P detects the video mode with 8 bits (256 colors) automatically.
To improve the picture quality you may select 16 bit (True Color) from the
Options Menu of the Remote Console, sub menu “Encoding”, entry “Color
Depth” (see the Section Encoding for details).
5. Finally, if the the Remote Console transfer rate is too high you may do an
adjustment using the Noise filter. The higher the filter level the more
information is filtered from the transferred video picture (see the Section
called Video in Chapter 6 for details) and the data rate is reduced.
Currently, the video picture with the best quality can be achieved with the settings
“16 bit (High Color)” in the Remote Console or “LAN (High Color)” in the web
frontend. This option can also be preset in Chapter 5: User Console. The sub
menu “Compression” from the Options menu has no influence on the picture
quality but on the data rate of the picture that is transferred to the Remote Console.
Reducing the Noise of the Video Picture
To reduce the noise from the video picture for the Remote Console you may adjust
the Noise filter. Prior to that we recommend optimizing the video picture as
described in the Section called Optimizing the Video Picture.
In most cases the rate of transferred data indicates the noise level. The higher the
transfer rate, the higher the noise of the video picture. You may do an adjustment
using the Noise filter. The higher the filter level the more information is filtered from
the transferred video picture (see Chapter 5: Video details) and the data rate is
reduced.