Acer ARMC_3P User Manual - page 72
60
P
RODUCT
U
SER
G
UIDE
Disable Drive Redirection
If enabled the Drive Redirection is switched off.
Force read-only connections
If enabled the Write Support for the Drive Redirection is switched off. It is not
possible to write on a redirected device.
Click Apply to submit your changes.
Software Requirements
To use this feature, you have to install the Drive Redirection software that is
currently only available for Microsoft Windows. This software can be
found
on your
ARMC/3P CD.
Configuration
Figure 57 Main View
Specify the parameters of the network connection (see Figure 57).
Device
This is the address (either the DNS name or the IP address) of the ARMC/3P
you would like to connect to.
Port
This is the network port. By default, ARMC/3P uses the remote console port
(#443) here. You may change this value if you have changed the remote
console port in your ARMC/3P’s network settings.