Acer ARMC_3P User Manual - page 57
C
HAPTER
4:
U
SAGE
45
low value of the network traffic is recommended and can be achieved as described
in the Section Optimizing the Video Picture. If compressed encoding is enabled,
a value in brackets displays the compressed transfer rate.
Figure 42 Status Line Transfer Rate
The next button displays the Remote Console Access settings.
Table 9 Buttons displaying the Access Status
One single user is connected to the Remote
Console of the ARMC/3P.
One or more users are connected to the Remote
Console of the ARMC/3P.
A remote user has exclusive access. You may not
access the remote host via Remote Console
unless the other user disables this option.
Exclusive access is set for you. Any other user
may not access the remote host via Remote
Console unless you disable this option.
The outer right button displays the state of the Monitor Only settings.
Table 10 Buttons displaying the Monitor State
The option Monitor Only is disabled.
The option Monitor Only is enabled.
For more information about Monitor Only and Exclusive Access settings see the
according paragraphs in the Remote Console Control Bar.
Optimizing the Video Picture
To achieve an optimal video picture for the Remote Console follow the steps as
given here:
1. Press the Auto Adjust button once (see the Section Remote Console
Control Bar for details).