Baker D30R User Manual - Instrument Overview
12/3/2009 | 71-022 V6
D30R
13
1
Instrument Overview
Front panel controls
1)
Printer port:
A parallel port for printing waveforms and summaries displayed by the Digital Tester is
available. This port may also be used for interfacing with the Motor Test Acquisition for
Windows program (MTA for Windows) on a personal computer.
2)
Function keys
Function key for data collection, recall, and printing of tests. The keys correspond to choices
provided on the CRT display below them. See the chapter on Storage and Print Capabilities,
for a detailed description of the tester’s storage capability.
3)
CRT display
The Cathode Ray Tube (CRT) is the location where the tester displays test information. At the
Top, menus corresponding to the four function keys above the CRT are shown. The main
portion of the screen displays the waveforms being measured and/or recalled with
corresponding graticules for reference. The bottom portion shows the volts/division for the
waveform, the name of the test on display, and the micro-seconds/division (micro-
amps/division for HiPot tests). When using the function keys, the screen will display options
pertinent to the storage, recall, and print capacities of the unit. Error messages are also
displayed here.
4)
Emergency stop switch
5)
Block port