Baker D30R User Manual - page 66
Data Recording, Retrieving
12/3/2009 | 71-022 V6
D30R
66
Recall
Recall is used to retrieve measurements from internal memory to the display.
Choosing Recall reveals a list of memory locations available for resistance, HiPot and surge
tests. Ten available Record memory locations are then listed on the display.
Choosing Recall also reveals a submenu, with choices that correspond to the four function
keys above the display.
Recall Resistance data
If the tester is currently in Resistance mode, the tester will display the recorded Resistance
data for the selected record.
Recall record submenu options
Summary Up
Down
Select
Press SUMMARY to
display the Resistance
data, Surge data in all
three leads, the Meg-
ohm, HiPot, and the
PI data stored in the
Record the cursor is
presently on.
Resistance, all three
surge wave patterns,
HiPot, and PI results
will be displayed
simultaneously and
operation will be
returned to the main
menu.
Up moves
the cursor
up the
Record list.
Down moves
the cursor
down the
Record list.
Press select to choose the
Record that the cursor is
presently on.
In Surge Mode: Press select to
reveal the next menu for lead
selection or to cancel a selection
(see next page).
In HiPot Mode: Press select to
recall HiPot and/or PI data from
the Record and return to the
main menu.
Fig 9-4: Recall Resistance data