Baker D30R User Manual - page 68
Data Recording, Retrieving
12/3/2009 | 71-022 V6
D30R
68
Note:
RECALL displays only one wave pattern from memory and clears any wave pattern
that has been previously recalled to the screen to compare two surge wave patterns
simultaneously.
Note
: A good way to check the wave patterns after the test is complete is to display all three
wave patterns at once. To do so, press the function key that corresponds to Recall. Press the
Up and/or Down keys to bring the cursor to the desired record and press the key that
corresponds to Summary. Stored data for all three lead locations appear on the display along
with any recorded HiPot data.
Print will print the record currently on the display.
Clear
Clear will remove or blank out the wave pattern and message area of the display. It has no
affect on memory locations or the data stored there.
Erase
The whole record erase feature allows the user to erase all of the Resistance , Meg-ohm,
HiPot, PI and Surge data of a particular record after that record’s data has been recalled with
the Recall Summary feature.
Recall lead submenu options
Cancel Up
Down
Select
Press CANCEL to
return to the
main menu
without recalling
any data.
Press ERASE to
delete the record
UP moves the
cursor up the Lead
list.
DOW moves the
cursor down the
Lead list.
Press SELECT to choose the
Lead that the cursor is
presently on.
Surge data is recalled from
memory to the display and
the user is returned to the
main menu.
Fig 9-7: Erase data