Bang & Olufsen BeoSound 5 Encore Installation Manual - page 11
-DSVNQJRDSSHMFR+ -
Network settings (LAN)
The next step is to ensure that the network connection is correct in order to be able to acces the network components, the Internet, ect. The
MDSVNQJBNMÖFTQ@SHNMHRMNQL@KKXBNMÖFTQDC@TSNL@SHB@KKXHEMNSHSLTRSADCNMDL@MT@KKXTMCDQ-$36.1*2$33(-&2
MODE
SOUND
MAINTENANCE
SERVICE SETTINGS
NETWORK INFO
PRODUCT INFO
SYSTEM SETTINGS
NETWORK SETTINGS
ROLES
WIRELESS - WPS
WIRELESS - AUTO
WIRELESS - MANUAL
ADVANCED
MODE
SOUND
MAINTENANCE
SERVICE SETTINGS
NETWORK INFO
SYSTEM SETTINGS
NETWORK SETTINGS
ROLES
HOSTNAME
BeoSound5-Encore-xxxxxxxx
MAC ADDRESS
00-09-A7-00-C1-09
DHCP
ENABLED
IP ADDRESS
192.168.100.X
SUBNET MASK
255.255.255.0
GATEWAY
192.168.100.1
DNS SERVER
8.8.8.8
NETWORK CONNECTION
YES
WIFI STATUS
DISABLED
WIFI ACCESS POINT
WIFI ACCESS POINT NOT CONFI...
WIFI LEVEL
0 dBm
WIFI QUALITY
0 dBm
DHCP
ENABLED
IP ADDRESS
192.168.100.X
SUBNET MASK
255.255.255.0
GATEWAY
192.168.100.1
DNS SERVER
8.8.8.8
NETWORK CONNECTION
YES
WIFI STATUS
DISABLED
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
1
2
Check network connection
By default the product is set to obtain network settings such as IP address and
F@SDV@X@TSNL@SHB@KKXEQNL@#'"/RDQUDQ#XM@LHB'NRS"NMÖFTQ@SHNM/QNSNBNK
In this case it is not necessary to perform any network settings. Follow the
procedure below to check the network connection:
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS, and press GO.
> Use the pointer to highlight NETWORK INFO.
"NMÖQLSG@SSGDMDSVNQJBNMMDBSHNMHRBNQQDBS@RRGNVMHMSGDDW@LOKDGDQD
If not, NETWORK SETTINGS must be made manually (see below).
> Use the pointer
SNKD@UDSGDLDMT
-$36.1*2$33(-&2
(ESGDMDSVNQJRDQUDQENQNMDQD@RNMNQ@MNSGDQMNS@TSNL@SHB@KKX@RRHFMDC(/
address, subnet mask, gateway and DNS addresses, they must be assigned
manually. Follow the procedure below:
> Turn the wheel to select SETTINGS, and press GO.
> Use the pointer to highlight NETWORK SETTINGS.
> Turn the wheel to select ADVANCED, and press GO.
> Turn the wheel to select DHCP, and press GO.
> Turn the wheel to select DISABLED, and press GO (now the greyed out items
ADBNLDRUHRHAKD
> Fill in the IP ADDRESS, SUBNET MASK, GATEWAY and DNS SERVER manually
@BBNQCHMFSNSGDQNTSDQBNMÖFTQ@SHNM
> Use the pointer
SNKD@UDSGDLDMT