Bang & Olufsen BeoSound 5 Encore Installation Manual - page 9
Router setup 9
Router setup
3NDMRTQDSG@SSGD-DSVNQJ+HMJQNTSDQCNDRMNSBNM×HBSVHSGNSGDQMDSVNQJBNLONMDMSRHSHRQDBNLLDMCDCSNCDÖMDSGD(/@CCQDRRRDFLDMSENQ
SGDQNTSDQ!@RHB@KKXSGD(/@CCQDRRB@MADBG@MFDCSNVG@SDUDQNQKDES@RHSHRATSSN@BGHDUD@RSQTBSTQDC@MCD@RXHMRS@KK@SHNMHSHRQDBNLLDMCDC
to cange it to 192.168.100.1. Follow the procedure below:
Important!
Do NOT use the enclosed CD rom.
> Ensure that the Network Link installation is connected correctly
(for further information please refer to the Network Link Installation Guide).
> Connect a client PC or MAC to the Network Link router (be sure that the
network settings allows to obtain an IP address automatically).
> Open a web browser and enter the following in the URL bar:
http://192.168.1.1 and press enter.
6GDMSGDKNFHMRBQDDM@OOD@QRKD@UDSGD4RDQM@LDÖDKCAK@MJ
and use the default password admin. Click OK.
Now the setup screen appears.
3GDRDSTORBQDDMBNMS@HMRU@QHNTRDKDLDMSRRTBG@R!@RHB2DSTO CU@MBDC
Routing, etc. where network settings can be made.
#DÖMDSGD(/@CCQDRRENQSGD-DSVNQJ+HMJQNTSDQ
The purpose of changing the IP address is to dedicate an open space for
-DSVNQJ+HMJOQNCTBSRRNSGDXCNMNSHMSDQEDQDVHSGNSGDQCDUHBDRHMSGD
customer’s existing network.
> Click on the tab Basic Setup and locate the
0MSRCPBBPCQQjCJB.
(MSGD@CCQDRRÖDKCSXODSGD(/@CCQDRR192.168.100.1.
> Click on the Save Settings button to store the new address.
Internet
ISP router
(192.168.1.1)
Network Link router
(192.168.100.1)
ML Gateway
NAS
Home
Automation
System
(192.168.1.10)
(192.168.100.X)
(192.168.1.X)
Client PC/MAC
(192.168.100.X)
(192.168.1.X)
1
2
Bang & Olufsen
BeoMaster 5
BeoSound 5 Encore
Optional
Ethernet switch
(192.168.100.X)
IP addresses are only examples