Bang & Olufsen BeoSound 5 Encore Installation Manual - page 12
-DSVNQJRDSSHMFR6+ -
Network settings (WLAN)
The next step is to ensure that the network connection is correct in order to be able to access the network components, the internet ect.
3GDOQNCTBSNEEDQRSGQDDCHEEDQDMSV@XRNEBNMÖFTQHMF@VHQDKDRRMDSVNQJ6/2ETKK@TSNL@SHB TSNRDLH@TSNL@SHB,@MT@KL@MT@K KKSGQDD
methods are safe, so it is recommended to choose the easiest solution, listed in descending order.
! Only WEP, WPA and WAP2 is supported encryption standards
WIRELESS - WPS (recommended)
6HQDKDRR/QNSDBSDC2DSTO6/2HR@RS@MC@QCENQD@RX@MCRDBTQDDRS@AKHRGLDMSNE@VHQDKDRRGNLDMDSVNQJ3GHRHRSGDOQDEDQQDCLDSGNCOQNUHCDC
that the router has this feature. Follow the procedure below to establish the wireless network connection:
> Use the pointer to highlight MODE.
> Turn the wheel to select SETTINGS, and press GO.
> Use the pointer to highlight NETWORK SETTINGS.
> Turn the wheel to select WIRELESS - WPS, and press GO.
MODE
SOUND
MAINTENANCE
SERVICE SETTINGS
NETWORK INFO
SYSTEM SETTINGS
NETWORK SETTINGS
ROLES
WIRELESS - WPS
GETTING CONFIGURATION
WIRELESS - WPS
GETTING CONFIGURATION
The product will now (for approximately the next two minutes), search for a
wireless router/access point to connect to. A process ring is shown around the
wheel to indicate that the process is on-going (illustrated here).
> Press the WPS button (typically marked ) on the Network Link router.
When the process is completed successfully, the network name of the router (SSID)
is displayed with the text CONNECTED!.
If the process fails within the two minute period, the text FAILED shortly appears
before the product returns to the NETWORK SETTINGS menu.
> Use the pointer to highlight NETWORK INFO
@MCBNMÖQLSG@SSGDRHFM@K
strenght for WIRELESS LEVEL is ‘
***
’ (or more).
! If the signal strenght is ‘
**’ (or less), a wireless network connection should
not
be recommended.
>
Click to continue with network settings.
WIRELESS - AUTO
WIRELESS - AUTO
connecting method
WIRELESS - MANUAL
WIRELESS - MANUAL
connecting method
MAINTENANCE
SERVICE SETTINGS
NETWORK INFO
SYSTEM SETTINGS
HOSTNAME
BeoSound5-Encore- serial no.
MAC ADDRESS
00-09-A7-00-C1-XX
NETWORK CONNECTION
YES
DHCP
ENABLED
IP ADDRESS
192.168.100.X
SUBNET MASK
255.255.255.0
GATEWAY
192.168.100.1
DNS SERVER
192.168.100.1
WIFI STATUS
ENABLED
WIFI ACCESS POINT
SSID name (Encryption Standard)
WIFI LEVEL
*****
0 dBm