Barazza 1FOFM7X-00 series Installation And Use Manual - Checks And Handling
6
CHECKS AND HANDLING
After having unpacked the appliance and removed all
the packing materials and protective films from the sur-
faces, check for any anomalies: if you find an anomaly,
do not proceed with the installation but contact your
retailer within 8 days, reporting the data provided on
the appliance’s data plate and describing the problems
you found (fig. 1).
Caution! Do not leave the packing materials (plastic
bags, polystyrene, etc.) unattended, as they are a
potential hazard for children and animals (danger
of suffocation).
Move the appliance to the installation location by lifting
it using the appropriate handles (fig. 1) and adopting
all the precautions necessary to prevent damage to the
appliance, people, animals and property.
DISPOSAL OF THE PACKAGING
Caution! Dispose of the packaging in compliance
with current regulations in the country where the
appliance is installed.
Package composition:
- cardboard
- polyethylene/ polypropylene: outer packaging film,
instructions bag
- expanded polystyrene: impact protections.
KONTROLLE UND EINBAU
Nach dem Auspacken des Geräts alle Verpackung-
smaterialien und die Schutzfolien der Oberflächen
entfernen, prüfen, ob sichtbare Unregelmäßigkeiten
vorhanden sind: Ist dies der Fall, die Installation abbre-
chen und sich innerhalb von 8 Tagen an den Händler
wenden, unter Angabe der Daten auf dem Typenschild
des Geräts und der aufgetretenen Probleme (Abb. 1).
Achtung! Das verwendete Verpackungsmaterial
(Tüten, Styropor, usw...) nicht unbeaufsichtigt
lassen, da es eine potentielle Gefahr für Kinder
und Tiere darstellt (Erstickungsgefahr).
Das Gerät an den entsprechenden Griffen (Abb. 1)
anheben und zum Installationsort bringen, dabei alle
notwendigen Sicherheitsmaßnahmen beachten, um
Schäden am Gerät, an Personen, Tieren und Sachen
auszuschließen.
1
ENTSORGUNG DER VERPACKUNG
Achtung! Die Verpackung nach den geltenden
Vorschriften im Aufstellungsland entsorgen.
Zusammensetzung Verpackung:
- Karton
- Polyäthylen / Polypropylen: äußere Schutzhülle
Verpackung, Beutel mit den Anweisungen
- Styropor: Stoßschutz.