Barco RLS W12 User Manual - page 40

RLS W12  02/12/2014

32

5. Getting Started

5.7  Adjusting the lens by horizontal and vertical lens shift

There has 2 methods to adjust the lens horizontal and vertical shift. Refer to below message.

• Press the 

MENU

 button on the remote control and choose Alignment -> Lens Control; then use the 

▼▲ ▲   ▼

 buttons to 

adjust the Zoom or Focus of the lens. 

When the OSD is not active, press enter to activate lens adjust

•  Press  the 

ENTER

 button on the remote control to access Lens Control adjustment screen before pressing 

ENTER

 once 

again to access the menu and use the 

▼▲ ▲   ▼

 buttons to adjust the horizontal or vertical position of the lens.

Press ENTER once to adjust 

zoom and focus

Press ENTER once to adjust 

zoom and focus with cross 

line

Press ENTER once to Adjust 

Lines shift with cross line

 ->

Enter

Enter

->

Enter

->

Enter

Press ENTER again to adjust 

vertical and horizontal lens 

shift