Barco RLS W12 User Manual - page 72
RLS W12 02/12/2014
64
13.Service
12.9 Trigger1 ~2
The projector comes with two sets of Trigger output. You can configure two different devices connected to the projector via
the trigger ports to be automatically turned on when the projector is on. There will be a 2-3 second delay prior to activation
to prevent operation of this function when the user is choosing the desired aspect ratio.
5:4
Outputs 12V of power on Trigger1 or 2 when the user chooses the 5:4 aspect ratio.
4:3
Outputs 12V of power on Trigger1 or 2 when the user chooses the 4:3 aspect ratio.
16:10
Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:10 aspect ratio.
16:9
Outputs 12V of power on Trigger1 or 2 when the user chooses the 16:9 aspect ratio.
1.88
Outputs 12V of power on Trigger1 or 2 when the user chooses the 1.88 aspect ratio.
2.35
Outputs 12V of power on Trigger1 or 2 when the user chooses the 2.35 aspect ratio.
Letterbox
Outputs 12V of power on Trigger1 or 2 when the user chooses the Letterbox aspect ratio.
Native
Outputs 12V of power on Trigger1 or 2 when the user chooses the native aspect ratio.
Auto
Outputs 12V of power on Trigger 1 or 2 when the projector is turned on.
12.10 Auto Source
ON
Default setting. By enabling this function, the projector will automatically determine the source of input every time it is
turned on so that the user will not have to make the selection on the OSD Menu.
OFF
Setting the function off will require the user to specify source of image input on the OSD Menu in order for the projector to
display the intended image.
12.11 Language
The user can change the language of the on screen menus and the local display menus to one of the available languages.
You can choose from the following nine languages: English, French, Spanish, German, Portuguese, Chinese Simplified, Chinese
Traditional, Japanese, Korean and Russian.