Barco RLS W12 User Manual - page 54

RLS W12  02/12/2014

46

9.Layout

9.2  Zoom

Due to the fact that some consumers may still be using older television systems, some TV programs may not display the 

edges of the image. Use this function to hide the image edge by choosing one of the following three options:

• Off 

Setting it to off makes no change to the projected image. 

• Crop 

  Setting it to "Crop" will add two "masks" equivalent to 3% of horizontal resolution on either side of the image and two 

similar masks above and below the projected image. 

• Zoom 

  You can use this function to enlarge the image's horizontal resolution over the 106% of the  default aspect ratio. Any 

portion that exceeds the original image will be cropped. 

16:10

Off

Crop

Zoom

5:4

2.35

When you set aspect ratio to “Native”, be sure to set Zoom to “Off” or “Crop”.

9.3  Main Select

When you want to project PIP image, use this function to specify the image source for the PIP image. This function is identical 

to Input Selection; for more information, please refer to 

 page 36: 7.2  Input Selection