Bauhn AMHST-014 Instruction Manual - Timer Setting
9
1300 886 649
Model: AMHST-014 Product Code: 48293 01/2015
www.tempo.org
AUS
Getting Started (Cont.)
Timer Setting
Use this timer setting to turn on and off at your set time with the sounds of
your favourite CD or radio program.
• Press the TIMER button to enter Timer Program mode: the LCD will show
"TR-ON" and the hour value of the clock will start flashing.
• Use the / buttons to set the desired hour you want the unit to turn on.
• Press the TIMER button again: the minute value of the clock will start
flashing.
• Use the / buttons to set the desired minute for the timer to come on.
• Press the TIMER button again until "TR-OFF" is displayed on the LCD and
the hour value of the clock is flashing.
• Use the / buttons to set the desired hour you want the unit to turn off.
• Press the TIMER button again: the minute value of the clock will start
flashing.
• Use the / buttons to set desired minute for the unit to turn off.
• Press the TIMER button again to set the timer-on input source.
• Use the / buttons to select the input source.
• Press the TIMER button again to set the timer-on volume level.
• Use the / buttons to select the desired volume level.
• Press the TIMER button again to confirm all the settings.
Sleep Setting
Use this sleep setting to preset a time (from 10 to 90 minutes) after which the
system goes into standby mode.
• Press the SLEEP button: the LCD will show the minutes remaining.
• Press the SLEEP button again to set the desired time period after which you
want the unit to to turn off. You can set the sleep time in 10-minute steps up
to 90 minutes.
• When the countdown has started, "SLEEP" will show on the LCD.
• Press the SLEEP button again to cancel the sleep setting.