Bauhn AMHST-014 Instruction Manual - Digital Media Operation
17
1300 886 649
Model: AMHST-014 Product Code: 48293 01/2015
www.tempo.org
AUS
Instructions (Cont.)
Digital Media Operation
The system is able to play back MP3 or WMA files stored in the memory
media connected to the USB port or SD card slot at the front of the main unit.
• Press the FUNCTION button on the front panel repeatedly, or the USB/SD
button on the remote control, to select USB or SD mode.
• Following the illustration on the right, insert your storage
media.
• Make sure the USB flash drive is fully inserted into
the USB port.
• Make sure the SD card is inserted straight, without
bending. (Connecting the card upside down or backwards
could damage the system or the card. Check to ensure
the direction is correct before connection.)
• The system will start reading the storage media
automatically after connection and will start playback.
• Playback functions for MP3 or WMA files are the same as for playing a CD,
as described on pages 14-15.
• To remove the USB flash drive/SD card, turn off the power or set the
FUNCTION mode to a different mode, then disconnect the USB device/SD
card by pulling it safely out of the USB port/SD card slot.
IMPORTANT!
Before inserting a USB drive or SD card into the main unit, make sure to
back up important files stored on the storage medium. The same applies
to playback of a CDR/RW disc with important tracks. We accept no
liability for loss of data due to inappropriate handling or lack of backup.
Recording from PHONO/CD/TAPE to USB/SD
• Insert a USB flash drive or SD card – do not insert both.
• Press the FUNCTION button and select the mode you want to record from
(PHONO, DISC or TAPE).
• Press the RECORD button on the remote control and start playing the
record, CD or tape.
• Press the RECORD/
button to stop recording.