Bauhn AMHST-014 Instruction Manual - Recording From Cd/usb/sd
14
1300 886 649
Model: AMHST-014 Product Code: 48293 01/2015
www.tempo.org
AUS
Instructions (Cont.)
Recording from CD/USB/SD
• Press the FUNCTION button on the front panel repeatedly and choose the
appropriate mode you want to record from (DISC or USB/SD).
• Insert a blank cassette tape suitable for recording in Deck A.
• Press the PAUSE button first and then the RECORD and PLAY
button at the cassette deck. The recording function is now on standby.
• Start playback of your CD or USB/SD source, then press the PAUSE
button at the cassette deck to start recording.
• To stop recording, press the STOP button for the source mode first, then
press the PAUSE and the STOP/EJECT button at the deck.
Recording from turntable
• Press the FUNCTION button on the front panel repeatedly, or the PHONO
button on the remote control, to select PHONO mode.
• Insert a blank cassette tape suitable for recording in Deck A.
• Press the RECORD and PLAY button to start recording.
• Select the desired record and start playback.
• Press the PAUSE and then the STOP/EJECT button at the cassette
deck when finished.
CD Player Operation
• Press the FUNCTION button on the front panel repeatedly, or the CD button
on the remote control, to select DISC mode.
• Press the OPEN/CLOSE button to open the CD tray, place a CD on the tray
and close the CD door.
• Adjust the volume and preset equaliser (refer to page 10) to suit your
personal listening preference.
• Use the CD/MP3 function buttons for playback control in DISC mode. For
basic CD playback, proceed as follows:
• PLAY/PAUSE - Press this button to start playing a CD. Pressing this
button during playback will stop playback temporarily; to restart, press this
button once again.
• STOP - Press this button to stop CD playback.
• SKIP/SEARCH - Press this button to skip to the next track.
• - Press this button to quickly advance through the track.