Cabletron Systems MRXI-22 User Manual - 3.3
Manual is about: 10BASE-T HUB
of
82
INSTALLATION
3-2
Figure 3-1
Attaching the Strain Relief
3.3
INSTALLING THE MRXI
You can mount the MRXI on a wall, a 19-inch rack, or place it
free-standing on any horizontal surface (i.e., shelf or desk, etc.). Select
one of the following subsections and perform the steps that are applicable
for your installation.
3.3.1
Rack Mounting the MRXI
Refer to Figure 3-2 and perform these steps to install the MRXI in a
19-inch rack.
1. Remove four cover screws (two from each side) located along the
front edges of each side of the MRXI.
2. Using the four cover screws removed in step 1, attach the rack
mounting brackets to each end of the MRXI.
MRXI
10 BASE-T HUB with LANVIEW