Cabletron Systems MRXI-22 User Manual - 1.2
INTRODUCTION
1-2
1.2
GETTING HELP
If you need additional support related to the MRXI-22 or MRXI-24, or if
you have any questions, comments, or suggestions concerning this
manual, feel free to contact Cabletron Systems Technical Support:
By phone .......................... (603) 332-9400
Monday-Friday; 8am - 8pm EST
By CompuServe
®
............. GO CTRON from any ! prompt
By Internet mail ............... support@ctron.com
1.3
THE 10BASE-T MRXI
The MRXI-22 and MRXI-24 are functionally identical. The MRXI-22
provides twelve RJ-45 connectors and the MRXI-24 provides twenty-four
RJ-45 connectors for network ports. Additional network connections are
made through the use of front panel EPIM modules (one module for the
MRXI-22, two modules for the MRXI-24). A variety of EPIMs are
available permitting the expansion of an Ethernet/802.3 network via:
•
Unshielded Twisted Pair Cable from the 10BASE-T Twisted Pair
Interface Module (EPIM-T).
•
Fiber Optic Cable, with SMA or ST connectors, from the Fiber Optic
Interface Modules (EPIM-F1, EPIM-F2 or EPIM-F3).
•
Thin-Net Cable from the Coaxial Interface Module (EPIM-C).
•
AUI Cable from the AUI Interface Module (EPIM-A or
EPIM-X).
Figure 1-1
The MRXI-24
MRXI-24
10BASE-T HUB with LANVIEW
The Complete Networking Solution