Cabletron Systems MRXI-22 User Manual - 5.3.3

LOCAL MANAGEMENT

5-9

Basic-Read

This allows read-only access to Local 

Management, but excludes read privileges to the 

Component Trap screen.

Read-Only

This allows read-only access to Local 

Management, but excludes access to security 

protected fields of the upper levels of authorization 

(read-write or super-user).

Read-Write

This allows you to read and write to Local 

Management fields, excluding IP Address, 

SubNET Mask, and Community Names.

Super-User

This access status gives the user read-write access 

to Local Management and allows changes to be 

made to all modifiable parameters including: 

Community Names, IP Addresses, Traps, and 

SNMP Objects.

5.3.3

Editing the Community Name Table Screen

The password that you use to access Local Management at the Password 

screen must have super-user access for your edits to take effect. If you 

enter a password with basic-read, read-only, or read-write access, Local 

Management displays the message “AUTHORIZATION PROHIBITS 

ACCESS”, and does not include editing capabilities.

Caution: Any community name assigned in the Community Name Table 

will be a password to its corresponding level of access to Local 

Management. The community name assigned super-user access is the 

only one that will give you complete access privileges to Local 

Management.

To make changes to the Community Name field:

1. Use the arrow keys to highlight the Community Name field adjacent 

to the access level of your choice.

2. Enter the community name, up to 32 characters in length, into the 

field.

3. Press the Return key.

4. Repeat steps 1 - 3 for editing any of the other community names.