Cabletron Systems MRXI-22 User Manual - 5.4
LOCAL MANAGEMENT
5-10
5. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press the Return key (or press F6). The message
“SAVED OK” appears indicating that your edits are saved to memory.
Please note that the first time you try to exit the screen without saving
your changes you will get a “NOT SAVED?” message. If you proceed
to exit without saving, you will lose your edits.
6. Exit the screen by either pressing the appropriate Function key or by
using the arrow keys to highlight the RETURN command and
pressing the Return key. The RETURN command will exit you to the
Feature Selection screen.
5.4
CONFIGURING THE MRXI
At the MRXI Configuration screen, you can assign the IP address and
subnet mask.
The Configuration screen also lets you:
•
Set the default gateway
•
Use the Port Lock Override
•
Use the Port Enable Override
5.4.1
Accessing the Configuration Screen
To access the Configuration screen from the Features Selection screen,
use the arrow keys to highlight the IP Address Assignment option and
press the Return key, or press F7. The Configuration screen, Figure 5-7,
appears.