Canon Image Runner 1600 Series Manual - page 12
Flow of Copy Operations
1-4
1
Basic Cop
ying F
eatures
Feeder
Staple copy: place the original face up
Vertical Placement Horizontal Placement
IMPORTANT
The copies are stapled at the part equivalent to the upper left side of the original.
NOTE
• If the top edge of the original is not aligned with the back edge of the platen glass
(by the arrow in the top left corner), prints may not be made correctly, depending on
the mode you have set.
• STMT and LTR originals can be placed either vertically or horizontally. However,
the scanning speed for horizontally placed originals is somewhat slower than for
vertically placed originals. You can place originals horizontally when printing with a
Preset Zoom, such as when processing LTR
to 11''x17''
.
• Horizontally placed LTR, LGL and 11''x17'' originals are referred to as LTR
,
LGL
and 11''x17''
.
• LGL and 11''x17'' originals must be placed horizontally.
• If
automatically set if you place your originals in the feeder. (See “Auto Collate,” on p.
3-8.)
●
If the message
■ Enter the Department ID and password. (See the
Reference Guide
.)
ABC
Original
(face up)
Copies are stapled here.
ABC
Original
(face up)
Copies are stapled here.