Canon Image Runner 1600 Series Manual - Interrupt Mode
Interrupt Mode
1-36
Basic Cop
ying F
eatures
1
Interrupt Mode
This mode enables you to interrupt the current job that is printing long enough to
make higher priority copies. This mode is useful if you need to make a rush copy
during a long copy job.
NOTE
• You can make interrupt copies when the machine is ready to scan.
• You cannot set the copy mode for the interrupt copy during scanning.
1
Press [Interrupt].
[Interrupt] lights.
If you want to make copies after changing the Department ID while Department
ID Management is enabled, press [ID]
➞ enter the Department ID and
password. (See the Reference Guide.)
NOTE
If you press [Interrupt], the current job being output is not interrupted until the
interrupt copy starts printing.
2
Place your original
➞ set the desired copy mode and quantity
(1 to 99).
3
Press [Start].
The interrupt copy job starts.
NOTE
• To cancel the Interrupt mode, press [Stop]
➞ select the job to be canceled.
• To cancel all settings and return the machine to the Standby mode, press [Reset].
Interrupt
Start