Canon Image Runner 1600 Series Manual - Optional Feeder (Adf-J1)
Placing Originals
1-12
1
Basic Cop
ying F
eatures
Optional Feeder (ADF-J1)
If the machine is equipped with the optional feeder, place a stack of originals, and
press [Start]. The machine automatically scans them into memory.
You can place the following originals in the original supply tray:
• Weight: 10 to 32-lb bond [37 to 128g/m
2
](set the originals one-by-one when they are very
thin (10 to 14-lb [37 to 51 g/m
2
]) or very thick (28 to 32-lb [105 to 128 g/m
2
])
• Size: 11''
✕ 17'' , LGL , LTR , or LTR .
• Tray capacity:
50 sheets (LTR or smaller)
25 sheets (LGL or larger)
IMPORTANT
• Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
• Avoid scanning the same original using the feeder more than approximately 30 times.
From being scanned repeatedly, the original gets folded or torn, which may cause a
paper jam.
• If the feeder rollers are dirty from scanning an original written in pencil, perform the
Feeder Cleaning procedure. (See the
Reference Guide
.)
1
Adjust the slide guides to fit the size of the originals.