Canon Image Runner 1600 Series Manual - Auto Collate
Changing the Current Standard Settings
3-8
3
Setting/Stor
ing Speci
fi
cations of the Cop
y Functions
Auto Collate
This mode allows automatic selection of the Collate (Offset Collate) mode when the
original is placed in the feeder. This is helpful when making multiple copies,
because you do not need to remember to select the Finisher mode.
IMPORTANT
This setting is available only if the Feeder (ADF-J1) is attached.
NOTE
The default setting is ‘ON’.
1
Enter the Additional Functions menu
➞ open the
SETTINGS> menu.
For details about the procedure above, see steps 1 and 2 in “Standard
Exposure,” on p. 3-3.
2
Press [
] or [
] to select
➞ press [OK].
When you press [OK], the
3
Press [
] or [
] to select
➞ press [OK].
If you want the machine to collate automatically, select
If you do not want the machine to collate automatically, select
When you press [OK], the specified mode is set, and the display returns to the
4
Press [Stop] to return to the Standby mode.
OK
OK
Stop