Canon Image Runner 1600 Series Manual - page 14
Flow of Copy Operations
1-6
1
Basic Cop
ying F
eatures
NOTE
• If there is a current job, the machine scans the original, and waits to print it. Printing
starts when the current job is completed.
• When scanning is complete, remove your original.
• If you have set Department ID Management, press [ID]. (See the
Reference
Guide
.)
• If the optional card reader is attached, remove the control card. (See the
Reference
Guide
.)
●
If you want to reserve a copy job while the machine is printing:
■ Place the original ➞ press [Start]. (See “Reserving Copy Jobs While Printing,”
on p. 1-34.)
●
If you want to cancel a copy job:
■ Press [Stop].
Press [
] or [
] to select
NOTE
• After you have pressed [Stop], several copies may be output from the machine.
• You can also cancel a copy job from the Monitor screen. (See the
Reference
Guide
.)
●
If you want to interrupt a copy job:
■ To interrupt a copy job when you need to make priority copies, press [Interrupt].
For instructions on interrupting a copy job, see “Interrupt Mode,” on p. 1-36.