Canon Image Runner 1600 Series Manual - Paper Selection

Paper Selection

1-19

1

Basic Cop

ying F

eatures

Paper Selection

This mode enables you to set the machine to automatically select the paper size, or 

to manually specify a paper size for a copy job.

NOTE

• If you are copying an original onto the same size paper at a copy ratio of 100%, the 

periphery of the original image may be cut slightly on the copy. For details of the size of 

the nonimage areas, see the 

Reference Guide

.

• For instructions on loading paper into the stack bypass, see the 

Reference Guide

.

Automatic Paper Selection

The machine automatically selects the copy paper.

IMPORTANT

You cannot use the Automatic Paper Selection mode when copying the following types of 

originals. Copy these originals using the Manual Paper Selection mode.

- Nonstandard size originals

- Highly transparent originals such as transparencies

- Originals with an extremely dark background

- Originals smaller than STMT

NOTE

• The default setting is ‘AUTO PAPER’. 

• You can set whether to activate or deactivate the Automatic Paper Selection for each 

paper drawer and the stack bypass. (See the 

Reference Guide

.) 

• You can use the stack bypass for the Automatic Paper Selection when:

- The paper is set on the stack bypass

- The paper size, is specified in in the

SETTINGS> menu

- The Auto Paper Selection is set to ‘ON’ for the stack bypass in the

ELIGIBLTY> menu