Canon Image Runner 1600 Series Manual - Rotate Collate
Changing the Current Standard Settings
3-9
3
Setting/Stor
ing Speci
fi
cations of the Cop
y Functions
Rotate Collate
This mode allows automatic selection of the Rotate Collate mode when the original
is placed in the feeder. For details about the Rotate Collate mode, see “Collating
Copies,” on p. 1-29.
IMPORTANT
• The Rotate Collate mode can only be used with the following paper sizes: LTR
, LTR
,
STMT
, or STMT
.
• The Rotate Collate can only be used in the following cases:
- Available paper size is loaded both vertically and horizontally.
-
Collate mode.
• If the Finisher-L1 is attached, the Rotate Collate mode is not available
NOTE
• The default setting is ‘ON’.
• This function is available only if the Feeder (ADF-J1) is attached.
1
Enter the Additional Functions menu
➞ open the
SETTINGS> menu.
For details about the procedure above, see steps 1 and 2 in “Standard
Exposure,” on p. 3-3.
2
Press [
] or [
] to select
➞ press [OK].
When you press [OK], the
3
Press [
] or [
] to select
➞ press [OK].
If you want the machine to rotate collate automatically, select
If you do not want the machine to rotate collate automatically, select
When you press [OK], the specified mode is set and the display returns to the
OK
OK