D-Link DES-3526 - Switch - Stackable Manual - page 156
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
143
Figure 7- 27. SNMP User Table Display window
The following parameters are displayed:
Parameter Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
Group Name
This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version
V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
Auth-Protocol
None - Indicates that no authorization protocol is in use.
MD5 - Indicates that the HMAC-MD5-96 authentication level will be used.
SHA - Indicates that the HMAC-SHA authentication protocol will be used.
Priv-Protocol
None - Indicates that no authorization protocol is in use.
DES - Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-
56) standard.
To return to the SNMP User Table, click the
Show All SNMP User Table Entries
link.
To add a new entry to the SNMP User Table Configuration window, click on the Add button on the
SNMP User Table window. This will open the SNMP User Table Configuration window, as
shown below.