D-Link DES-3526 - Switch - Stackable Manual - Download Configuration File
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
175
Parameter Description
Server IP
Enter the IP address of the server from which you wish to download firmware.
File Name
Specify the path and filename of the firmware on the Server.
Type
Specify the purpose of the firmware:
Download: Clicking this radio button will specify a download to the Switch. This will be
the firmware that the Switch will immediately use.
Update: Clicking this radio button will save the firmware to the Switch's memory but
not configure the Switch for this firmware. The Switch may hold two firmware versions
specified as Section 1 and Section 2.
Information about firmware on the Switch can be viewed in the Firmware Management table in the
same window. It holds the following information:
Parameter Description
ID
The user-defined Section ID of the firmware on the Switch.
Boot Status
The firmware that is currently being run on the Switch will be identified in this field with
the term "Boot".
Version
The runtime version of the firmware.
Size
The size of the firmware, in bytes.
Date
The date that the firmware was added to the Switch.
From
The IP address of the Server from which the firmware came.
User
The name of the user who downloaded the firmware.
Set Boot
Click the Apply button in this field to set the firmware version to be used upon the
next boot up of the Switch.
Delete
Click the X in this column to permanently delete the corresponding firmware from the
Switch.
Download Configuration File
To download a settings file from a TFTP server, click on the TFTP Service folder in the Mainte-
nance folder and then the Download Configuration File link:
Figure 9- 2. Download Settings from TFTP Server window