D-Link DES-3526 - Switch - Stackable Manual - page 30
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
17
First Time Connecting to The Switch
The Switch supports user-based security that can allow you to prevent unauthorized users from
accessing the Switch or changing its settings. This section tells how to log onto the Switch.
NOTE: The passwords used to access the Switch are case-sensitive;
therefore, "S" is not the same as "s."
When you first connect to the Switch, you will be presented with the first login screen.
NOTE: Press Ctrl+R to refresh the screen. This command can be
used at any time to force the console program in the Switch to
refresh the console screen.
Press Enter in both the Username and Password fields. You will be given access to the command
prompt DES-3526:4# shown below:
There is no initial username or password. Leave the Username and Password fields blank.
Figure 4- 2. Command Prompt
NOTE: The first user automatically gets Administrator level privileges. It is
recommended to create at least one Admin-level user account for the
Switch.