D-Link DES-3526 - Switch - Stackable Manual - System Log Server
DES-3526 / DES-3526DC Fast Ethernet Layer 2 Switch
79
Figure 6- 48. System Severity Settings
Use the drop-down menus to configure the parameters described below.
Parameter
Description
Severity Name
Choose how the alerts are used from the drop-down menu. Select log to send
the alert of the Severity Type configured to the Switch’s log for analysis.
Choose trap to send it to an SNMP agent for analysis. Or select all to send the
chosen alert type to an SNMP agent and the Switch’s log for analysis.
Severity Type
Choose what level of alert will trigger sending the log entry or trap message as
defined by the Severity Name. Select critical to send only critical events to the
Switch’s log or SNMP agent. Choose warning to send critical and warning
events to the Switch’s log or SNMP agent. Select information send
informational, warning and critical events to the Switch’s log or SNMP agent.
Click Apply to implement the new System Severity alert level.
System Log Server
The Switch can send Syslog messages to up to four designated servers using the System Log Server.
In the Configuration folder, click System Log Server, to view the window shown below.
Figure 6- 49. System Log Servers window
The parameters configured for adding and editing System Log Server settings are the same. See the
table below for a description.