D-Link DG-102S User Manual - page 16
Other manuals for DG-102S:
Specification Sheet, Datasheet, Quick Install Manual, User Manual, Quick Start Manual, Quick Start Manual
Manual is about: VoIP Station Gateway
of
63
DG-102S VoIP Station Gateway
10
Configuring the VoIP Gateway using a Web Browser
Setting Up the Connection
In order to use a web browser to configure the VoIP gateway, you must make sure it has a valid Ethernet
connection to a PC or LAN via its LAN or WAN ports.
The VoIP gateway comes with a default IP address of 10.1.10.4. You must make sure the PC is in the same IP
domain as the VoIP gateway. You can do this by changing the IP address of the PC as shown below.
Once this is done, run any browser on the PC and point it to the default IP address of the VoIP as shown below: