D-Link DG-102S User Manual - page 50

DG-102S VoIP Station Gateway 

44 

Factory Reset 

Factory Reset to Default Value window

Before performing a Factory Reset, be absolutely certain that this is what you want to do. Once the reset is done, 

all of the device’s settings stored in NV-RAM will be erased and restored to values present when the device was 

purchased. 

Note:After performing the Factory Reset, make sure to redefine the IP settings for the device in the IP 

Configuration menu. Then perform a Restart System on the device. After these three procedures are 

performed, your Factory Reset is complete. 

Click on the Reset to Factory Default button at the bottom of the window to reset the NV-RAM to the default 

values that were present when you purchased the device.