D-Link DG-102S User Manual - page 60

DG-102S VoIP Station Gateway 

54 

♦  Box Name  Enter the IP address of the device.  Please note that you must use brackets for this entry (see 

example above). 

♦  CPE Gateway MAC Address  This is the MAC address of the device.

♦  Call Manager IP Address  Enter an IP address for the call manager device.

♦  Use DHCP  When this is checked (3), the VoIP will attempt to obtain its IP settings from a DCHP server 

located on your LAN.

♦  CPE Gateway IP Address  Enter the IP address of the gateway.

♦  IP Netmask  Enter a subnet mask for the VoIP gateway.

♦  Default Gateway  Enter the IP address of the WAN device (usually a router) you are using to make the 

WAN connection.

Click on the Update Flash Memory button at the bottom of the window to save the settings to the device’s flash 

memory.