D-Link DG-102S User Manual - page 26
DG-102S VoIP Station Gateway
20
Boot Menu---Update Firmware and Configuration Files screen
After making your changes in the fields above, press RESET DEVICE TO START UPDATE to initiate the update
sequence.
Each item on the Update Boot and Application screen is described below:
♦ Software Update Mode This specifies downloading the image file through a WAN Link.
♦ TFTP Server Address The IP address of the TFTP server where the runtime or configuration file is
located. This entry is used only if the Firmware Update is set to Enable.
♦ Software Update Determines whether or not the device will try to look for a runtime image file on the
TFTP server.
♦ File Name The complete path and filename of the runtime image file on your TFTP server to be uploaded
to the device.
♦ Last TFTP Server Address This is a read-only field that displays the IP address of the last TFTP
server to be accessed.
Save Changes
To save all the changes made in the current session to the device’s flash memory, use the arrow keys to highlight
the fourth menu item on the Boot Menu, Save Changes, and press
displayed: