D-Link DGS-3312SR Product Manual - Lacp Port Settings
DGS-3312SR Gigabit Layer 3 Switch
Type
This pull-down menu allows you to select between Static and LACP (Link
Aggregation Control Protocol.) LACP allows for the automatic detection of links in a
Port Trunking Group.
Master Port
Choose the Master port for the trunk group.
Member Unit
Choose the Switch unit on which to set up a trunk group. Trunk groups must be
confined to ports on a single Switch.
Port Map
Choose the members of the trunked group. Up to eight ports per group can be
assigned to a group.
Flooding Port
A trunking group must designate one port to allow transmission of broadcasts and
unknown unicasts.
Active Port
Shows the port that is currently forwarding packets.
LACP Port Settings
The LACP Port Mode Setup window is used in conjunction with the Link Aggregation windows to create port trunking
groups on the Switch. Using the following window, the user may set which ports will be active and passive in processing
and sending LACP control frames.
Figure 4- 10. LACP Port Mode Table window
The user may set the following parameters:
46