D-Link DGS-3312SR Product Manual - Access Profile Table
DGS-3312SR Gigabit Layer 3 Switch
Parameter
Description
Daylight Saving
Time State
Use this pull-down menu to enable or disable the DST Settings.
Daylight Saving
Time Offset in
Minutes
Use this pull-down menu to specify the amount of time that will constitute your local
DST offset
− 30, 60, 90, or 120 minutes.
Time Zone Offset
from GMT in +/-
HH:MM
Use these pull-down menus to specify your local time zone’s offset from Greenwich
Mean Time (GMT.)
DST Repeating
Settings
Repeating - Using repeating mode will enable DST seasonal time adjustment.
Repeating mode requires that the DST beginning and ending date be specified
using a formula. For example, specify to begin DST on Saturday during the second
week of April and end DST on Sunday during the last week of October.
From: Which Week
of the month
Enter the week of the month that DST will start.
From: Which Day of
Week
Enter the day of the week that DST will start on.
From: Which Month
Enter the month DST will start on.
From: What Time
HH:MM
Enter the time of day that DST will start on.
To: Which Week
Enter the week of the month the DST will end.
To: Which Day
Enter the day of the week that DST will end.
To: Which Month
Enter the month that DST will end.
To: What Time
HH:MM
Enter the time DST will end.
DST Annual Settings
Annual - Using annual mode will enable DST seasonal time adjustment. Annual
mode requires that the DST beginning and ending date be specified concisely. For
example, specify to begin DST on April 3 and end DST on October 14.
From: What Month
Enter the month DST will start on, each year.
From: What Date
Enter the day of the week DST will start on, each year.
From: What Time
Enter the time of day DST will start on, each year.
To: What Month
Enter the month DST will end on, each year.
To: What Date
Enter the day of the week DST will end on, each year.
To: What Time
Enter the time of day that DST will end on, each year.
Access Profile Table
Access profiles allow you to establish criteria to determine whether or not the Switch will forward packets based on the
information contained in each packet’s header. These criteria can be specified on a basis of VLAN, MAC address or IP
address.
80