D-Link DGS-3312SR Product Manual - Sntp Setting
DGS-3312SR Gigabit Layer 3 Switch
Parameter
Description
Unit
Allows you to specify a Switch in a Switch stack using that Switch’s Unit ID. The
number 15 indicates a Switch in standalone mode.
From/To
A consecutive group of ports may be configured starting with the selected port.
Admin State
This pull-down menu allows you to enable or disable Port Security (locked MAC
address table for the selected ports.)
Max.Addr(0-10)
The number of MAC addresses that will be in the MAC address forwarding table for
the selected Switch and group of ports.
Lock Address Mode
This pull-down menu allows you to select how the MAC address table locking will be
implemented on the Switch, for the selected group of ports. The options are
Permanent, DeleteOnReset, and DeleteOnTimeout.
SNTP Setting
The Simple Network Time Protocol (SNTP) (an adaptation of the Network Time Protocol (NPT)) is configured on the
Switch using the following windows.
Time Setting
Figure 4- 46. Current Time: Status window
The following parameters can set or are displayed:
Parameter
Description
Current Time
Displays the current system time.
78