D-Link DGS-3312SR Product Manual - Mac Notification
DGS-3312SR Gigabit Layer 3 Switch
Figure 4- 40. Bandwidth Settings window
The following parameters can be set or are displayed:
Parameter
Description
Unit
Allows you to specify a Switch in a Switch stack using that Switch’s Unit ID. The
number 15 indicates a Switch in standalone mode.
From/To
A consecutive group of ports may be configured starting with the selected port.
Type
This drop-down menu allows you to select between RX (receive,) TX (transmit,) and
Both. This setting will determine whether the bandwidth ceiling is applied to receiving,
transmitting, or both receiving and transmitting packets.
no_limit
This drop-down menu allows you to specify that the selected port will have no
bandwidth limit. Enableddisables the limit.
Rate
This field allows you to enter the data rate, in kb/s, that will be the limit for the
selected port.
MAC Notification
MAC address notification is used to monitor MAC addresses as they are learned and entered into the Switch’s MAC
forwarding database.
73