D-Link DGS-3312SR Product Manual - Igmp
DGS-3312SR Gigabit Layer 3 Switch
RADIUS Server
Click the Radius Server link in the Radius Server folder under Port Access Entity.
Figure 4- 17. Authentic Radius Server Setting window
The following parameters can be set:
Parameter
Description
Succession
RADIUS server settings index.
Radius Server
Type in the IP address of the RADIUS server.
Authentic Port
This is the UDP port on the RADIUS server that will be used to authenticate users.
The default is 1812.
Accounting Port
This is the UDP port on the RADIUS server that will be used to log authentication
events. The default is 1813.
Key
Type the shared-secret key used by the RADIUS server and the Switch. Up to 32
characters can be used.
Confirm Key
Retype the Key information from the Key field above.
Status
This drop-down menu allows you to select Valid or Invalid.
IGMP
In order to use IGMP Snooping it must first be enabled for the entire Switch (see Advanced Settings). You may then fine-
tune the settings for each VLAN using the IGMP Snooping Settings window. When enabled for IGMP snooping, the
Switch can open or close a port to a specific Multicast group member based on IGMP messages sent from the device to the
52