D-Link DI-304 User Manual - page 22
DI-304/DI-304M ISDN Remote Router
Checking the Network IP Configuration
The following explains how to setup the Transmission Control Protocol/ Internet
Protocol (TCP/IP) in Windows 95/98. For more detailed information on TCP/IP
setup, refer to the Windows 95/98 help files. For other operating systems refer to the
user manuals.
1. On the desktop, right-click
Network Neighborhood
. Click
Properties
. The
Network
window will open:
Your particular system may differ from the window shown here. Check if you have
an Ethernet Network Interface card (NIC) installed. If not, refer to the installation
documentation from the NIC card manufacturer and install the card and drivers.
If you have installed the NIC card,
1. Click the
Add
button. The
Select Network Component
Type
dialog box will open. This box has four options:
Client, Adapter,
Protocol,
and
Service.
2. Select Protocol
and click the
Add
button. The
Select Network Protocol
dialog box will open.
3. Select Microsoft in the left scrolling window, then select TCP/IP on the
right, and click
OK
. It will return to the
Network
dialog box.
14