D-Link DI-304 User Manual - page 89
DI-304/DI-304M ISDN Remote Router
Firmware Upgrade
Before upgrading your router firmware, you must install the
Router Tools
. The
Firmware Upgrade Utility
is included in the tools. The following steps will guide
you through the process of upgrade. Note that the examples below use Windows OS.
1. Download the latest firmware from D-Link’s Website.
2. Use Web Configurator to enable the Firmware Upgrade function. Click
Firmware Upgrade (TFTP Server)
to open the following screen. Click
OK
to
enable the function.
3. Click
Start
→
Programs
→
Router Tools
→
Firmware Upgrade Utility
to
launch the
Firmware Upgrade Utility
.
The
Router IP
field will show the IP address of your router. Click
Browse
to select
the new firmware file. Click
Upgrade
. The upgrade status will be shown on the
progress bar.
Note
:
The definition of firmware filename:
v2kxxxxx.bin: Binary code file of the firmware.
v2kxxxxx.web: WebPages file of the firmware.
v2kxxxxx.cfg: Default settings file of the firmware.
v2kxxxxx.all: v2kxxxxx.bin + v2kxxxxx.web.
v2kxxxxx.rst: v2kxxxxx.cfg + v2kxxxxx.bin + v2kxxxxx.web.
Note
: When you upgrade firmware, the *.bin file should be the first file you upload
and then the *.web. After 30 seconds, reboot your router. If you do not follow
these steps, you may have problems upgrade the firmware.
81