D-Link DI-304 User Manual - page 23
Manual is about: D-Link ISDN Router User's Guide
of
105
DI-304/DI-304M ISDN Remote Router
Configuring the TCP/IP Protocol
1. On the
Network
dialog box Configuration card, select TCP/IP and then click
Properties
. The
TCP/IP Properties
dialog box will open.
2. On the
IP Address
tab, click
Obtain an IP address automatically
. As the
DHCP (Dynamic Host Configuration Protocol) server built into the router is enabled
by default, your computer will get an IP address, subnet mask, and other related IP
network settings from the router.
3. On the
DNS Configuration
tab, click
Disable DNS
.
15