D-Link DI-304 User Manual - page 83

DI-304/DI-304M ISDN Remote Router 

♦ 

Refresh – 

To obtain the latest information, click here to reload the page. 

ISDN 

♦ 

ISDN Link Status – 

If the link is active, this field will show 

up

. 

Otherwise, it shows 

down

. 

♦ 

Dial ISDN – 

Clicking here causes the router to dial to the preset ISP. 

Click 

Internet Access Setup 

→

 Dial to a Single ISP 

to configure dial-up 

settings. 

♦ 

Activity – 

Displays the connection name for each B channel. If the B 

channel is idle, it will show 

Idle

. 

◊

   Drop B1 - Click to disconnect the B1 channel. 

◊

   Drop B2 - Click to disconnect the B2 channel. 

Broadband Access 

♦ 

Broadband Access Mode/Status – 

Displays the broadband access mode 

and status. If the broadband connection is active, it will show 

PPPoE

, 

PPTP

, 

or Static IP 

depending on which access mode is enabled. If the 

connection is idle, it will show "

- - 

-". 

♦ 

WAN IP Address – 

The WAN IP address for the active connection. 

♦ 

Dial PPPoE or PPTP – 

Click to force the router to establish a PPPoE or 

PPTP connection. 

♦ 

Drop PPPoE or PPTP – 

Click to force the router to disconnect the 

current active PPPoE or PPTP connection. 

Triggered Dial-out Packet Header 

Triggered Dial-out Packet Header shows the last IP packet header that triggers the 

router to dial out. 

75