D-Link DI-304 User Manual - page 32
DI-304/DI-304M ISDN Remote Router
2. Remote Dial-In Access Setup:
Remote access or LAN-to-LAN remote access settings are made here.
3. Virtual TA (Remote CAPI) Setup:
Use this menu to create a Virtual TA user account and enable/disable the
built-in Virtual TA server.
Advanced Setup:
The following settings are for advanced configurations only. These items do not
need to be configured for standard Internet access.
1. Call Control and PPP/MP Setup:
Sets bandwidth-on-demand (BOD) parameters for the MP (Multiple link PPP)
protocol. Also, some call control parameters may be set here.
2. Call Schedule Setup:
Supports totals 15 profiles for call schedule usage.
3. NAT (Network Address Translation) Setup:
Sets NAT configurations, such as Port Redirection, etc.
4. Static Route Setup:
This menu has 10 routing rules for static routing usage. Here you may
add/delete or activate/deactivate any static route.
5. Remote Dial-in User Setup:
This menu supports 10 remote dial-in accounts for remote access
applications. You can manage these dial-in accounts under the setup menu.
6. LAN-to-LAN Dialer Profile Setup
The LAN-to-LAN Dialer Profiles are different from last setup menu. Here up
to 16 LAN to LAN profiles can be set for access to up to 16 remote networks
via an ISDN line. These profiles have dial-out/dial-in/static route functions.
7. IP Filter/Firewall Setup
The router has a powerful built-in firewall. Up to 84 Call Filter and Data
Filter rules may be set.
System Management:
1. Online Status
Click this item to view the current online status and statistics of the system.
2. Time Setup:
Sets time information for the router.
3. Management Setup
24