D-Link DI-304 User Manual - page 25
Manual is about: D-Link ISDN Router User's Guide
of
105
DI-304/DI-304M ISDN Remote Router
button to release the current configuration. Wait a few seconds and click
Renew
to
get a new IP configuration from the router.
2. If the IP configuration is correct, you will be able to use the Ping diagnostic utility
built in Microsoft Windows to Ping the router. Click
Start
→
Programs
→
MS-
DOS Prompt
. A command mode window will open. Type
ping 192.168.0.1
(default
IP of the router) to diagnose the network connectivity. If both hardware and
software are correct, your computer will receive a response from the router as shown
on the next page. If not, verify that the Ethernet cable is connected to the router
properly and the Ethernet port LED on the front panel is lit.
17