D-Link xStack DES-6500 User Manual - 802.1X Auth Mode Settings
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
802.1x Auth Mode Settings
The following window is used to set the type of authentication mode used in employing the 802.1X security settings.
Simply use the pull-down menu to select
port_based
or
mac_based
802.1X and click the
Apply
button.
Figure 6- 95. 802.1X Auth Mode Settings window
802.1X Authenticator Settings
To configure the 802.1X authenticator settings, click
Configuration >
Port Access Entity
>
802.1x Authenticator
Settings
:
Figure 6- 96. Configure 802.1X Authenticator Parameter window
To view the 802.1X authenticator settings on a different line card in the switch stack, use the
Unit
pull-down menu to
select that switch by its ID number in the switch stack. To configure the settings by port, click on the hyperlinked port
number under the
Port
heading, which will display the following table to configure:
120