D-Link xStack DES-6500 User Manual - Stp Instance Settings
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
STP Instance Settings
The following window displays MSTIs currently set on the Switch. To view the following table, click
Configuration >
Spanning Tree > STP Instance Settings
:
Figure 6- 23. STP Instance Settings
The following information is displayed:
Parameter Description
Instance Type
Displays the instance type(s) currently configured on the Switch. Each instance type
is classified by a MSTI ID. CIST refers to the default MSTI configuration set on the
Switch.
Instance Status
Displays the current status of the corresponding MSTI ID
Instance Priority
Displays the priority of the corresponding MSTI Instance Type. The lowest priority will
be the root bridge.
Priority
Click the
Modify
button to change the priority of the MSTI. This will open the Instance
ID Settings window to configure. The
Type
field in this window will be permanently set
to
Set Priority Only
. Enter the new priority in the
Priority
field and click
Apply
to
implement the new priority setting.
Click
Apply
to implement changes made.
Clicking the hyperlinked name will allow the user to view the current parameters set for the MSTI Instance.
Figure 6- 24. STP Instance Operational Status – CIST
Figure 6- 25. STP Instance Operational Status – Previously Configured MSTI
51